MENU - PROCES-DATAMENU - PROCES-DATA

Info notes overview

Important information: VIGO 5.9 and Windows 10 ‘in-place upgrade’

Info note Important information: VIGO 5.9 and Windows 10 ‘in-place upgrade’ We’ve recently answered questions related to Microsoft Windows 10, including ‘in-place’ upgrades and clean installations. The majority of Windows users will very soon upgrade their Windows PC to Windows 10 and most users will be doing an ‘in-place upgrade’

Read More »

Running VIGO 5.9 on Microsoft Windows 10

Info note Running VIGO 5.9 on Microsoft Windows 10 “Windows 10 is very similar to Windows 8 under the hood, and Windows 8 was very similar to Windows 7. There are no huge application security model or driver architecture changes, as there were when moving from Windows XP to Windows

Read More »

PD 602 DPI routing between IP networks

Info note PD 602 DPI routing between IP networks When using PD 602 DPIs, it is often required that the process controller can access data in other DPIs or in other interface modules.   This info note contains a number of examples showing the required configuration of a PD 602

Read More »

VIGO 5.9 – VIGO tools, help is not working

Info note VIGO 5.9 – VIGO tools, help is not working Help for the majority of the VIGO tools was created in Windows Help format .hlp, which requires a feature not included in various versions of Windows*. However, you can download a program that makes it possible to view Help

Read More »

PD 3930 PC Parallel interface module

Info note PD 3930 PC Parallel interface module Replacing an old PC running VIGO with a new model Important Note: The driver for the P-NET interface PD 3930 (x32 bit) is not supported by Windows x64. It should also be observed that no parallel port extension boards or parallel port

Read More »

PROCES-DATA’s list of used port numbers

Info note PROCES-DATA’s list of used port numbers IP Communication, VIGO: VIGO uses port number 34378 by default in connection with IP communication. If no specific port number is defined in the MIB, VIGO will use port 34378 by default. If the use of a different port is required, this

Read More »

PD 4000 RAM backup battery

Info note PD 4000 RAM backup battery Charging of the RAM backup battery The PD 4000 modules are charged before they are tested. PROCES-DATA guaranties a period of three months from the day of production, during which the built-in buffer battery is capable of having a sufficient voltage level to

Read More »

VIGO 5.8, info

Info note VIGO 5.8, info Installation, placering og håndtering af brugerdata: Installeres VIGO 5.8 med defaultindstillinger, bliver brugerdata placeret i C:Documents and SettingsAll UsersVIGO eller i C:UsersPublicVIGO afhængigt af Windows operativsystem. Ved installation af VIGO 5.8 installeres desuden P-NET Gateway Service. VIGO 5.8 og P-NET Gateway Service optræder som to

Read More »

VIGO Version overview

Info note VIGO, Version overview VIGO 5 – The Fieldbus Management System – Version overview Upgrading from version 4.x to 5.x VIGO 5.x provides automatic conversion of projects made with versions 4.0 – 4.3. When VIGO has performed the conversion, it is required that a PC node with the node type VIGO_PC

Read More »

PD 340 Lineariseringsfunktion

Info note PD 340 Lineariseringsfunktion På grund af sin konstruktion er PD 340 Flowtransmitter i sig selv lineær, selv uden elektronisk kompensation. De fleste af vore kunder foretrækker ikke at gå under 25 mm rør, selv til meget lave flow. Derfor er der for yderligere at forbedre lineariteten blevet udviklet

Read More »

PD 340 Linearizing Function

Info note PD 340 Linearizing Function Because of its construction, the PD 340 Flow Transmitter is, by its very nature linear, even without any electronic compensation. However, most of our customers prefer not to use anything smaller than 25 mm as a pipe diameter, even for very low flow rates.

Read More »

Firmware Download Feature (Bootloader)

Info note Firmware Download Feature (Bootloader) Modules listed below have a built-in bootloader, which makes it possible to update the firmware of a device, in the event that new functionality is being developed, or errors have been corrected. The update can be done on site, using the firmware download program

Read More »

Advanced use of the PD 3950 USB to P-NET Interface

Info note Advanced use of the PD 3950 USB to P-NET Interface Gateway PC Configuration of Gateway PC (Server) New installation or replacement of PD 3930 PC P-NET Interface Module – Install / upgrade to VIGO 5.9 or higher. – By default is the P-NET Gateway Service configured to support

Read More »

Firewall warnings during VIGO installation on Windows XP

Info note Firewall warnings during VIGO installation on Windows XP Important note: This info note is only relevant in cases where the personal Firewall has been activated for the computer on which VIGO is about to be installed. General information: Windows Firewall helps protect your computer by preventing unauthorized users

Read More »

New PD 340 Electronics module

Info note New PD 340 Electronics module In December 2004 a new version of the electronics for the PD 340 Flow transmitter was released.  The basic functionality of the new electronics is the same as for the old version. However, there has been one important change, which applies especially to

Read More »