PHONE:+45 87 200 300

PD 210 Display Unit

Price:DKK 2,500.00


The PD 210 is a local display unit that connects directly to a PD 340 Flow Transmitter. With this device it is possible to display the flow rate, volume counters, temperature, setpoint etc. Furthermore, the PD 210 display may also be used to change setpoint values, pre-set counters and to perform the entire configuration of the Flow Transmitter.


Instantaneous value, flow: The unit displays the actual flow rate, e.g. in m3/h.

Accumulative Counter: The unit displays the total volume, e.g. in m3.

Pre-set Counter: Before commencing a measurement, a SET-point is firstly entered, and the pre-set counter is reset manually. When the required volume has been reached, OUTPUT2 provides a stop signal.

Instantaneous value, temperature: The display unit shows the actual temperature in °C.

Configuration and calibration: The PD 210 display unit may be used to carry out the full configuration of a Flow Transmitter.

Fault finding: The flow transmitter is equipped with a comprehensive test system that is able to reveal faults arising from improper use of the transmitter, or from a malfunction of the transmitter during use.


The Display Unit PD 210 is connected to the Flow Transmitter using a 2-wire cable. The cable enables data to be exchanged between the Flow Transmitter and the display unit, and it also provides power for the module. The cable length may be up to 100 m.

The Display Unit PD 210 can be mounted directly on the Terminal Box of the PD 340 and still be operated conveniently. This mounting style can be ordered as an option when ordering the PD 340 and the PD 210. The PD 340 Flow Transmitter will then be delivered as one complete device, as shown.

The PD 210 is intended for fixed installations e.g. on a panel.

Operational Ambient Temperature: -20°C to + 50°C.

The unit is built into a case of NORYL PPO and sealed to IP 65.


PD340 - Approvals and Certificates

Regulatory Compliance

Declaration of conformity - Food Contact Materials

Declaration of conformity according to regulation on food contact materials:
PROCES-DATA document number: 552034

For customers in the EU:
Declaration of conformity to Commission Regulation (EU) No 10/2011 on plastic materials and articles intended to come into contact with food:
PROCES-DATA document number: 551764

The above-mentioned documents are available on request. Please contact our the sales department.

Control reports from the Danish Veterinary and Food Administration

MID / OIML Evaluation Certificate

The PD340 is certified according to:

– WELMEC guide 8.8 “General and Administrative Aspects of the Voluntary System of Modular Evaluation of Measuring instruments under the MID”
– OIML R117-1 Edition 2007 (E) “Dynamic measuring systems for liquids other than water”.

Certificate number: TC7204
PROCES-DATA document number: 551395

By means of the TC7204 Evaluation Certificate, the PD340 may, without further tests, be used as part of a certified measuring system.

Using the certificates requires a written permission from PROCES-DATA.

In order to get a copy of the TC7204 Evaluation Certificate, or to get a permission for using it, please contact our sales department.


PD340 - Datasheets, Manuals, Brochures & Guides


UK PD 340 Brochure Book


PD 340 Datasheet

PD 340 C102 Datasheet

PD 210 Datasheet

PD 385 Datasheet


PD340 Manual

PD 385 Manual

Installation Guides

PD 340 Installation Guide

PD340 Installation recommendations