PD 870 Motor Controller, intended for speed/position control of brushed DC motor.
3 High power voltage output (20A max @ 24V), single or differantial quadratur counters for encoder.
PD 870 Motor Controller, intended for speed/position control of brushed DC motor.
3 High power voltage output (20A max @ 24V), single or differantial quadratur counters for encoder.
The PD 626 is an integrated controller and driver for stepper motors. It can directly drive a unipolar stepper motor.
13000 Hz stepping rate, 1.8 A per winding by integrated driver, Half stepping, Single full stepping, Dual full stepping.
The PD 626 is an integrated controller and driver for stepper motors. It can directly drive a unipolar stepper motor.
13000 Hz stepping rate, 1.8 A per winding by integrated driver, Half stepping, Single full stepping, Dual full stepping.
Simple P-NET Interface, RS-485 to Light-Link converter.
Its main purpose is to provide a transparent link between standard RS485 P-NET and the optical Light-Link P-NET.
Simple P-NET Interface, RS-485 to Light-Link converter.
Its main purpose is to provide a transparent link between standard RS485 P-NET and the optical Light-Link P-NET.
Redundancy P-NET Interface, RS-485 to Light-Link converter.
Its main purpose is to provide a redundant and transparent link between optical Light-Link and a duplicated RS-485 P-NET.
Redundancy P-NET Interface, RS-485 to Light-Link converter.
Its main purpose is to provide a redundant and transparent link between optical Light-Link and a duplicated RS-485 P-NET.
Simple P-NET Interface Triple Speed, RS-485 to Light-Link converter
Its main purpose is to provide a transparent link between standard RS485 P-NET and the optical Light-Link P-NET.
Simple P-NET Interface Triple Speed, RS-485 to Light-Link converter
Its main purpose is to provide a transparent link between standard RS485 P-NET and the optical Light-Link P-NET.
Unit for galvanic isolation of P-NET RS485
including:
2 pcs. PD 661 SPI, mounted on BM 010
1 pcs. bottom for base module, with fibre optics
1 pcs. DIN rail, plastic
2 pcs. PG 7 cable glands
2 pcs. PG 11 cable glands
4 pcs. Terminals for 24 V DC
Unit for galvanic isolation of P-NET RS485
including:
2 pcs. PD 661 SPI, mounted on BM 010
1 pcs. bottom for base module, with fibre optics
1 pcs. DIN rail, plastic
2 pcs. PG 7 cable glands
2 pcs. PG 11 cable glands
4 pcs. Terminals for 24 V DC